Phantom Tech SU0508L User Manual download pdf (Page 8)

Cutting the Top and Bottom Rail and Catch Frame

Cutting the Top Rail of the Sure View

Screen is an easy process.

1. Using the “Length to be cut” dimension

calculated on Page 7, carefully measure the Top

Rail on the end opposite the end cap. Mark on

all sides to ensure an even cut.

2. Wearing safety glasses, cut straight through the

Top Rail using either a chop saw or a

hacksaw with a bi-metal blade. (A)

Choosing and Cutting the Bottom Rail

Before cutting, it is important to select the

correct Bottom Rail for installation. The Sure View

Screen package comes with two Bottom Rails to

accommodate both at and angled door sills. Please

refer to (B) to determine the correct Bottom Rail.

1. Using the same “Length to be cut” dimension

used for the Top Rail, measure and mark the

appropriate Bottom Rail on all sides to ensure an

even cut. The Bottom Rail can be cut on

either side.

2. Cut straight through the Bottom Rail. (C)

Cutting the Catch Frame

Either end of the Catch Frame can be cut.

1. Using the Screen Housing and Catch Frame

“Length to be Cut” dimension calculated on

Page 7, carefully measure and mark the Catch

Frame on all sides to ensure an even cut.

2. Cut straight through the Catch Frame. (D)

NOTE: It is important to wear safety glasses at all

times when cutting components of the Sure View

Screen. After cutting any part of the Sure View

Screen use a le to remove any burrs from the cut

surfaces.

Catch Frame

Length

to be cut

Choose the correct Bottom Rail for either

flat or angled door sills.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Phantom Tech SU0508L User Manual Page 8